teaching

693Currently online
108Today's Reading
29Share Today
Multilingual display

Extruder screw how to draw cad drawing

2018-04-15 01:36:26

CAD is a powerful drawing software, in the use of the software we can draw a variety of design drawings, let's take a look at how to draw extruder screw in CAD.

Tools/Materials

Software used: CAD

Methods/Steps
1

Open the CAD software and enter the operation interface of CAD as shown in the figure:

2

Set the line line as a dotted line in this interface, as shown in the figure:

3

After setting the line line, find the line command, as shown in the figure:

4

Use the line command to draw a dotted line as a line, as shown in the figure:

5

Then set the line line to a solid line, and draw a straight line at the top and bottom of the line, as shown in the figure:

6

Then find the arc command in the edit area, as shown in the figure:

7

Using the arc command, draw the arc line as shown in the figure:

8

After drawing the arc line, find the pruning command in the above tool area, as shown in the figure:

9

Click the pruning command to delete the excess lines, as shown in the picture;

10

Repeat the above steps for operation, so that the graph of our extruder screw is drawn, as shown in the figure:

Recommendation